Why No Intermediate Cut of Rough

Every spring a concern about rough height and density becomes an issue and the question "why don't we have an intermediate cut of rough" comes up. Playability is very important to us and our goal is to provide a challenging and fair golf course that a golfer of any caliber can enjoy. Catering to the high and low handicappers at the same time is a very difficult challenge. In addition to that challenge, our course, as with any business or household has to operate within certain budget constraints and what we try to do is provide the best (and fairest) playing conditions within those constraints.

That being said, why not have an intermediate cut? Essentially, it comes down to two things: cost and time. Years ago, there was a first cut of rough mowed three times a week with a five-deck contour mower, and green and tee complexes were mowed at a different height, with our other contour mower. The problem we continuously encountered was being unable to keep up on green and tee complexes using only one mower. The grass in these areas was always too long and once mowed, it was messy and produced poor playing conditions around the greens. We had to prioritize what was more important: a first cut around the rough, or a shorter, more manageable rough around the green? We chose the green complexes.

To solve this problem, we converted the intermediate rough mower into a tee complex mower and dedicated the other contour mower to green complexes. This allowed us to get all green and tee complexes mowed twice a week, providing a cleaner and more playable scenario around greens. The obvious downside to this plan is it leaves us unable to mow an intermediate cut between the fairway and the rough. This issue is exacerbated this year due to the moisture and decent growing weather we have had recently. In a normal year, heat and/or moisture stress would have already started thinning out the rough. Be patient I still expect this to happen as we get deeper into the summer season.

Why not get a new mower and start cutting this intermediate rough again? We actually tried to do this with our 60" zero turn mower last year, but  the results were ugly. For those of you who play the course regularly and find yourself in the rough often, you are aware that the grading in our rough is, well, rough. This uneven grading makes it very difficult to get a good cut with a mower that doesn't have independent floating decks. When we tried our zero turn, we dropped the height a mere 1/2" and mowed around a couple of holes, scalping more turf than we felt was acceptable. To do this correctly, we need the right mower. The contour or rough mowers we have found the most success with retail anywhere from $35,000 up to $74,000 a piece. On top of the cost of equipment, we would have the cost of an additional employee, fuel, equipment maintenance costs and time.

This is definitely a hot topic of discussion and one that we are genuinely including in our conversation about the future. No process we have in place is necessarily permanent and there is always room for change and improvement. Unfortunately, the cost of changing this process prevents it from being one we can address immediately. We will continue to look for ways to mitigate the problem in the meantime.

We could always change our layout to mimic the #2 course at Pinehurst. They have two mowing heights:  1) greens height, and 2.) everything else. :)

Lastly, I had a cool opportunity to contribute to the NGA's Nebraska Golfer publication that was sent out last week. Here is the link to that article.

http://www.nebgolf.org/nebraska_golfer/ngaedition4/index.html